Recognition of aerial alloy grades by laser-induced breakdown spectroscopy
FENG Zhong-qi1, ZHANG Da-cheng*1, CUI Min-chao*2, YANG Run-qiang1, DING Jie1, ZHU Jiang-feng1
1. School of Physics and Optoelectronic Engineering, Xidian University, Xi′an 710071, China; 2. School of Mechanical Engineering, Northwestern Polytechnical University, Xi′an 710072, China
Abstract:Laser-induced breakdown spectroscopy (LIBS) has become a popular analytical technique on metal materials such as steel and aluminum alloys for its multi-element, highly sensitive and non-contact measurement. To apply LIBS for high accuracy identification of aerial alloy grades, six different grades of aerial alloys were measured. A 1064nm Nd∶YAG laser was used as the excitation source. 100 sets of spectra for each alloy were collected, and each set of spectra was the average result of 100 laser pulses. The spectra of aerial alloy were divided into training set and test set in ratio of 7∶3. Then the partial least squares discriminant analysis (PLS-DA) model was established to identify the aerial alloy LIBS by full spectrum data and characteristic line data respectively. Both the two models obtained 100% recognition accuracy for the training set and test set. The result showed that the combination of LIBS and chemometrics could identify aerial alloy grades successfully. In addition, the PLS-DA model based on characteristic spectral line data could achieve the same results as the full spectrum data model with less data input. This work could provide a methodological reference for applying LIBS to on-site inspection of aerial alloys.
ZHANG D C,HU Z Q,SU Y B,et al.Simple method for liquid analysis by laser-induced breakdown spectroscopy (LIBS)[J].Optics Express,2018,26(14):18794-18802.
[3]
YU J,MA Q,Motto-Ros V,et al.Generation and expansion of laser-induced plasma as a spectroscopic emission source[J].Frontiers of Physics,2012,7(6):649-669.
[4]
Mansoori A,Roshanzadeh B,Khalaji M,et al.Quantitative analysis of cement powder by laser induced breakdown spectroscopy[J].Optics and Lasers in Engineering,2011,49(3):318-323.
[5]
Bengtson A,Thomas B.激光诱导击穿光谱技术对冶金样品中钢及炉渣的同时分析[J].冶金分析,2009,29(2):8-13.Bengtson A,Thomas B.Laser ablation breakdown spectroscopy technique for simultaneous analysis of steel and slags in metallurgical samples[J].Metallurgical Analysis,2009,29(2):8-13.
[6]
王帝,陆继东,董美蓉,等.对煤中热值检测的新型校正模型[J].光谱学与光谱分析,2016,36(8):2607-2612.WANG Di,LU Ji-dong,DONG Mei-rong,et al.A new calibrated model of coal calorific value detection with LIBS[J].Spectroscopy and Spectral Analysis,2016,36(8):2607-2612.
[7]
尹华亮,侯宗余,袁廷璧,等.激光诱导击穿光谱技术在环境监测中的应用综述[J].大气与环境光学学报,2016,11(5):321-337.YIN Hua-liang,HOU Zong-yu,YUAN Ting-bi,et al.Application review of laser-induced breakdown spectroscopy in environmental monitoring[J].Journal of Atospheric and Environmental Optics,2016,11(5):312-327.
[8]
於筱岚,彭继宇,刘飞,等.激光诱导击穿光谱技术用于抹茶和绿茶粉的快速鉴别[J].光谱学与光谱分析,2017,37(6):1908-1911.YU Xiao-lan,PENG Ji-yu,LIU Fei,et al.Fast identification of matcha and green tea powder with laser-induced breakdown spectroscopy[J].Spectroscopy and Spectral Analysis,2017,37(6):1908-1911.
[9]
陈兴龙,董凤忠,陶国强,等.激光诱导击穿光谱在地质录井岩性快速识别中的应用[J].中国激光,2013,40(12):1215001.CHEN Xing-long,DONG Feng-zhong,TAO Guo-qiang,et al.Fast lithology identification by laser-induced breakdown spectroscopy[J].Chinese Journal of Lasers,2013,40(12):1215001.
[10]
SUN L X,YU H B,CONG Z B,et al.Applications of laser-induced breakdown spectroscopy in the aluminum electrolysis industry[J].Spectrochimica Acta Part B:Atomic Spectroscopy,2018,142:29-36.
[11]
CUI M C,Deguchi Y,WANG Z,et al.Improved analysis of manganese in steel samples using collinear long-short double pulse laser-induced breakdown spectroscopy (LIBS)[J].Applied Spectroscopy,2019,73(2):152-162.
[12]
Cui M C,Deguchi Y,Wang Z,et al.Enhancement and stabilization of plasma using collinear long-short double-pulse laser-induced breakdown spectroscopy[J].Spectrochimica Acta Part B:Atomic Spectroscopy,2018,142:14-22.
[13]
丛智博,孙兰香,辛勇,等.基于LIBS 技术的多元素合金定量分析[J].冶金分析,2010,30(增刊):116-119.CONG Zhi-bo,SUN Lan-xiang,XIN Yong,et al.Quantitative analysis of multi-element alloys with laser-induced breakdown spectroscopy[J].Metallurgical Analysis,2010,30(Supp.):116-119.
[14]
孙兰香,于海斌,辛勇,等.采用激光诱导击穿光谱技术测定合金钢中锰和硅的含量[J].光谱学与光谱分析,2010,30(12):3186-3190.SUN Lan-xiang,YU Hai-bin,XIN Yong,et al.Quantitative analysis of Mn and Si of alloy steels by laser-induced breakdown spectroscopy[J].Spectroscopy and Spectral Analysis,2010,30(12):3186-3190.
[15]
GUO Y M,GUO L B,LI J M,et al.Research progress in Asia on methods of processing laser-induced breakdown spectroscopy data[J].Frontiers of Physics,2016,11(5):114212.
[16]
Stipe C B,Hensley B D,Boersema J L,et al.Laser-induced breakdown spectroscopy of steel:a comparison of univariate and multivariate calibration methods[J].Applied Spectroscopy,2010,64(2):154-160.
[17]
Campanella B,Grifoni E,Legnaioli S,et al.Classification of wrought aluminum alloys by artificial neural networks evaluation of laser induced breakdown spectroscopy spectra from aluminum scrap samples[J].Spectrochimica Acta Part B:Atomic Spectroscopy,2017,134:52-57.
[18]
丛智博,孙兰香,辛勇,等.基于激光诱导击穿光谱的合金钢组分偏最小二乘法定量分析[J].光谱学与光谱分析,2014(2):542-547.CONG Zhi-bo,SUN Lan-xiang,XIN Yong,et al.Quantitative analysis of alloy steel based on laser induced breakdown spectroscopy with partial least squares method[J].Spectroscopy and Spectral Analysis,2014(2):542-547.
[19]
Afgan M S,Hou Z Y,Wang Z,et al.Quantitative analysis of common elements in steel using a handheld μ-LIBS instrument[J].Journal of Analytical Atomic Spectrometry,2017,32(10):1905-1915.
[20]
LIN J J,LIN X M,GUO L B,et al.Identification accuracy improvement for steel species using a least squares support vector machine and laser-induced breakdown spectroscopy[J].Journal of Analytical Atomic Spectrometry,2018,33(9):1545-1551.
[21]
ZHANG T L,XIA D H,TANG H S,et al.Classification of steel samples by laser-induced breakdown spectroscopy and random forest[J].Chemometrics and Intelligent Laboratory Systems,2016,157:196-201.
[22]
沈桂华,李华昌,史烨弘.激光诱导击穿光谱发展现状[J].冶金分析,2016,36(5):16-25.SHEN Gui-hua,LI Hua-chang,SHI Ye-hong.Progress in laser induced breakdown spectroscopy[J].Metallurgical Analysis,2016,36(5):16-25.
[23]
张大成,冯中琦,李小龙,等.远程激光诱导击穿光谱定量分析铝合金中的微量元素[J].光子学报,2018,47(8):69-74.ZHANG Da-cheng,FENG Zhong-qi,LI Xiao-long,et al.Quantitative analysis of aluminium alloy with remote laser-induced breakdown spectroscopy[J].Acta Photonica Sinica,2018,47(8):69-74.
[24]
Feng Z Q,Zhang D C,Wang B W,et al.The classification of plants by laser-induced breakdown spectroscopy based on two chemometric methods[J].Plasma Science and Technology,2020,22:074012.
[25]
倪力军,张立国.基础化学计量学及其应用[M].2版.上海:华东理工大学出版社,2011.
[26]
刘可,邱春玲,田地,等.一种基于激光诱导击穿光谱的塑料分类方法[J].光谱学与光谱分析,2017,37(11):3600-3605.LIU Ke,QIU Chun-ling,TIAN Di,et al.Laser-induced breakdown spectroscopy for plastic classification[J].Spectroscopy and Spectral Analysis,2017,37(11):3600-3605.
[27]
Ballabio D,Consonni V.Classification tools in chemistry.Part 1:linear models.PLS-DA[J].Analytical Methods,2013,5(16):3790-3798.
[28]
NIST 2019 Atomic Spectra Database NIST Standard Reference Database 78[EB/OL].www.nist.gov/pml/atomic-spectra-database.