Abstract：According to the insoluble characteristics of nickel-tungsten alloy, the sample was dissolved with nitric acid by heating at low temperature. The tungsten oxide coated on sample surface was chelated by adding hydrogen peroxide to fully dissolve the sample. Then, the determination method of trace cerium in nickel-tungsten alloy by inductively coupled plasma mass spectrometry (ICP-MS) was established. Under the selected instrumental conditions, the 140Ce was used as the isotope. The rhodium (20 μg/L) was selected as internal standard for the determination. The calibration curve was plotted using the signal strength ratio of cerium and rhodium as the vertical coordinate and using the mass concentration of cerium as the horizontal coordinate. The results showed that the linear relationship was good. The linear regression equation was y=0.688 x+0.047 with linear correlation coefficient of R2=0.999. The detection limit of cerium was 0.08 μg/g. The lower determination limit was 0.26 μg/g. The proposed method was applied to the determination of cerium in actual samples, and the relative standard deviations (RSD, n=9) of determination results were between 0.10% and 1.0%. The recoveries were between 88% and 117%.
韩 美,杨国武,齐 荣,胡净宇. 电感耦合等离子体质谱法测定镍钨合金中铈[J]. 冶金分析, 2015, 35(11): 34-37.
HAN Mei, YANG Guo-wu, QI Rong, HU Jing-yu. Determination of cerium in nickel-tungsten alloy by inductively coupled plasma mass spectrometr. , 2015, 35(11): 34-37.
王龙妹. 稀土元素在新一代高强韧钢中的作用和应用前景 [J]. 中国稀土学报, 2004, 22(1): 48-54. WANG Long-mei. Application prospects and behavior of RE in new generation high strength steel with superior toughness [J]. Journal of the Chinese Rare Earth Society, 2004, 22(1): 48-54.
[2]
王龙妹, 杜挺, 卢先利, 等. 微量稀土元素在钢中的作用机理及应用研究 [J]. 稀土, 2001, 22(4): 37-40. WANG Long-mei, DU Ting, LU Xian-li, et al. Study of behaviors and application of micro-rare earth elements in steel [J]. Chinese Rare Earths, 2001, 22(4): 37-40.
[3]
李晓闲, 张雪辉, 刘坚锋. 电沉积镍钨合金的应用及研究现状 [J]. 上海有色金属, 2010, 31(2): 88-93. LI Xiao-xian, ZHANG Xue-hui, LIU Jian-feng. Application and present research status of electrodeposited Ni-W alloys[J]. Shanghai Nonferrous Metals, 2010, 31(2): 88-93.
[4]
郭忠诚, 翟大成, 杨显万, 等. 电沉积CeO2-Ni-W-P-SiC复合镀层组织结构的研究 [J]. 电镀与涂饰, 2000, 19(1): 5-8. GUO Zhong-cheng, ZHAI Da-cheng, YANG Xian-wan, et al. Study of the structure of composite cerium dioxide nickel-tungsten-phosphorus-silicon carbide electrodeposits [J]. Electroplating & Finishing, 2000, 19(1): 5-8.
[5]
张欢, 郭忠诚, 蒋琪英, 等. 稀土-Ni-W-P-SiC 脉冲复合镀层的耐蚀性研究 [J]. 材料热处理学报, 2007(3): 116-120. ZHANG Huan, GUO Zhong-cheng, Jiang Qi-ying, et al. Study on corrosion resistance of RE-Ni-W-P-SiC composite coating prepared by pulsing current plating[J]. Transactions of Materials and Heat Treatment, 2007(3): 116-120.
[6]
于媛君, 亢德华, 王铁, 等. 电感耦合等离子体质谱法测定钢铁及合金中镧、铈、镨、钕、钐 [J]. 冶金分析, 2011, 31(9): 18-21. YU Yuan-jun, KANG De-hua, WANG Tie, et al. Determination of lanthanum, cerium, praseodymium, neodymium, samarium in iron, steel and alloy by inductively coupled plasma mass spectrometry [J]. Metallurgical Analysis, 2011, 31(9): 18-21.
[7]
聂玲清. 高分辨电感耦合等离子体质谱法测定钢中痕量铈 [J]. 冶金分析, 2009, 29(8): 11-15. NIE Ling-qing. Determination of trace cerium in steel by high-resolution inductively coupled plasma mass spectrometry [J]. Metallurgical Analysis, 2009, 29(8): 11-15.
[8]
魏春艳, 丁美英. ICP-AES法测定钢中微量La、Ce、Pr、Nd和Sm [J]. 稀土, 2004, 25(5): 24-32. WEI Chun-yan, DING Mei-ying. Simultaneous determination of micro La, Ce, Pr, Nd and Sm in steel by ICP-AES [J]. Chinese Rare Earths, 2004, 25(5): 24-32.
[9]
张晓娟,邱海鸥,汤少展,等. ICP-MS 法测定铅基板栅合金中镧和铈[J].分析试验室,2014,33(7):771-773. ZHANG Xiao-juan,QIU Hai-ou,TANG Shao-zhan, et al. Determination of lanthanum and cerium in lead grid alloys by ICP-MS [J]. Chinese Journal of Analysis Laboratory,2014,33(7):771-773.
[10]
齐荣, 杨国武, 韩美, 等. 电感耦合等离子体原子发射光谱法测定钛合金中镧铈钇 [J]. 冶金分析, 2014,34(2):53-57.QI Rong, YANG Guo-wu, HAN Mei,et al. Determination of lanthanum, cerium, yttrium in titanium alloys by inductively coupled plasma atomic emission spectrometry [J]. Metallurgical Analysis,2014, 34(2):53-57.
[11]
戴亚明. 原子光谱分析法测定纯钨中痕量杂质和钨基硬质合金中组成元素 [J]. 现代科学仪器, 2009, 6(12): 96-100.DAI Ya-ming. Atomic spectrometric determination of impurities in pure tungsten and components in tungsten-based alloys [J]. Modern Scientific Instruments, 2009, 6(12): 96-100.
