国产顺序扫描式波长色散X射线荧光光谱仪在铁基合金分析中的应用

doi:10.13228/j.boyuan.issn1000-7571.011901

摘要
图/表
参考文献
相关文章 (12)

全文: PDF (1321 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了拓展自主研发的顺序扫描式波长色散X射线荧光光谱仪(WDXRF)在铁基合金检测领域的应用,通过对测试条件、谱线干扰方法、强度表征方法、基体校正方法等的研究,开发了覆盖多种类型铁基合金样品,可以对16种常用元素成分进行直接快速分析的方法。实验采用铣床对样品进行表面处理,对各待测元素设定合适的条件并进行所有样品的测试,然后在软件中分别用经验系数法和Alpha系数法进行工作曲线绘制,并采用估计标准误差(SEE)作为曲线质量评定依据,通过SEE值的大小确定各元素的基体校正方法,最后选取典型样品进行了方法重复性和正确度的考察。结果显示,无论对于常量元素Fe、Cr、Ni、Mn,还是微量元素Al、Si、P、S、Ti、V、Co、Cu、Zr、Nb、Mo、W,实验方法都有较好的正确度、精密度以及检出限,并有较宽的测试范围。研究表明,在铁基合金分析领域,实验方法能够满足日常测试分析的需求。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘明博
	王英倩
	倪子月
	李冬玲
	沈学静
	王海舟

关键词 ：波长色散X射线荧光光谱(WDXRF), 铁基合金, Alpha系数法, 经验系数法, 估计标准误差(SEE)

Abstract：In order to expand the application of self-developed sequential scanning wavelength dispersive X-ray fluorescence spectrometer in testing of iron-based alloys, the method for direct and rapid analysis of 16 common elements was developed. The proposed method could cover various types of iron-based alloy samples. The measurement conditions, spectral interference correction, intensity characterization and matrix correction methods were investigated. The surface of sample was treated in experiments using milling machine. Proper conditions were set for each element in the analysis of samples. Then the working curves were prepared in software by experiential coefficient method and Alpha coefficient method, respectively. The standard error of estimate (SEE) was adopted as the evaluation basis of curve quality. The matrix correction methods of elements were confirmed through the values of SEE. Finally, the repeatability and trueness were investigated by selecting typical samples. The results showed that the proposed method had good trueness, precision and limit of detection whether for major elements (Fe, Cr, Ni and Mn) or minor elements (Al, Si, P, S, Ti, V, Co, Cu, Zr, Nb, Mo and W). Moreover, the determination range was wide. The experimental results indicated that the proposed method could meet the requirements of routine testing in the analysis field of iron-based alloys.

Key words： wavelength dispersive X-ray fluorescence spectrometry (WDXRF) iron-based alloy Alpha coefficient method empirical coefficient method standard error of estimate(SEE)

收稿日期: 2022-06-01

ZTFLH:	O657.34
	TF125.1+3

基金资助:国家重点研发计划基础科研条件与重大科学仪器设备研发专项(2022YFF0707300)

通讯作者: 王海舟(1940—),男,中国工程院院士,主要从事冶金和材料表征方法及评价;E-mail:wanghaizhou@ncschina.com

作者简介: 刘明博(1981—),男,高级工程师,博士生,主要从事XRF仪器研发工作;E-mail:liumingbo@ncschina.com

引用本文:

刘明博, 王英倩, 倪子月, 李冬玲, 沈学静, 王海舟. 国产顺序扫描式波长色散X射线荧光光谱仪在铁基合金分析中的应用[J]. 冶金分析, 2023, 43(1): 1-7. LIU Mingbo, WANG Yingqian, NI Ziyue, LI Dongling, SHEN Xuejing, WANG Haizhou. Application of domestric sequential scanning wavelength dispersive X-ray fluorescence spectrometer in analysis of iron-based alloy. , 2023, 43(1): 1-7.

链接本文:

http://yjfx.chinamet.cn/CN/10.13228/j.boyuan.issn1000-7571.011901 或 http://yjfx.chinamet.cn/CN/Y2023/V43/I1/1

[1] 芦飞. X射线荧光光谱法测定不锈钢中多种元素[J].冶金分析,2014,34(7):69-73.
LU Fei.Determinnation of multi-element in stainless steel by X-ray fluorescence spectrometry[J].Metallurgical Analysis,2014,34(7):69-73.
[2] 常利民,祁巍,王雪红.烧结熔融制样-X射线荧光光谱法测定硅铁中主次组分[J].冶金分析,2020,40(1):51-55.
CHANG Limin,QI Wei,WANG Xuehong.Determination of major and minor components in ferrosilicon by X-ray fluorescence spectrometry with sintering and fusion sample preparation[J].Metallurgical Analysis,2020,40(1):51-55.
[3] 周仁红. XRF分析铁合金中主元素的方法技术研究[D].成都:成都理工大学,2016.
[4] 张震,赖万昌,于新华,等.便携式XRF分析仪快速测定主元素Fe含量[J].金属矿山,2009,39(7):109-110.
ZHANG Zhen,LAI Wanchang,YU Xinhua,et al.Portable XRF analyzer used for determining the content of main element Fe[J].Metal Mine,2009,39(7):109-110.
[5] 周世融,何剑锋,任印权,等.X射线荧光光谱中低分离度重叠峰分解的方法研究[J].光谱学与光谱分析,2020,40(4):1221-1226.
ZHOU Shirong,HE Jianfeng,REN Yinquan,et al.Research on a decomposing method of low-resolution overlapping peaks in X-ray fluorescence spectra[J].Spectroscopy and Spectral Analysis,2020,40(4):1221-1226.
[6] 甘露,罗立强,吴晓军.因子分析在X射线荧光光谱重叠谱峰识别中的应用[J].光谱学与光谱分析,2000,20(1):91-94.
GAN Lu,LUO Liqiang,WU Xiaojun.Application of factor analysis to identification of overlapped spectrum in XRF[J].Spectroscopy and Spectral Analysis,2000,20(1):91-94.
[7] 丰梁垣.X荧光分析中基本参数法和理论α系数法的结合—一种可行的实践方法[J].光谱学与光谱分析,1990(2):38-42.
FENG Liangyuan.Combination of fundamental parameters method and theoretical Alpha coefficient method as applied in XRF analysis——a feasible method in practice[J].Spectroscopy and Spectral Analysis,1990(2):38-42.
[8] 谭秉和,王桂华.X射线荧光分析中谢尔曼方程逆问题的求解(理论影响系数法和基本参数法)[J].光谱学与光谱分析,2000,20(3):399-401.
TAN Binghe,WANG Guihua.Solution of inverse problem of Sherman equation in quantitative X-ray fluorescence analysis[J].Spectroscopy and Spectral Analysis,2000,20(3):399-401.