Determination of lead and bismuth in arsenic-antimony soot by inductively coupled plasma atomic emission spectrometry after matrix separation with hydrobromic acid
LUO Haixia1,2, CHEN Diangeng1,2
1. BGRIMM MTC Technology Technical Co.,Ltd.,Beijing 102628,China; 2. Bejing Key Lab of Mineral Resource Evaluation ＆ Analysis,Beijing 102628,China
Abstract：Besides of As and Sb, the arsenic-antimony soot also contains some other valuable elements such as Pb and Bi. As a kind of secondary resource, the arsenic-antimony soot has attracted more and more attention in recent years. The analysis and testing of valuable elements in arsenic-antimony soot can provide quantitative basis for the recycle and trade of such secondary resource. Since the contents of As and Sb in arsenic-antimony soot are relatively high, if the sample is decomposed by the traditional HNO3-HCl-HClO4 system, Sb will be partially hydrolyzed after leaching with HCl, resulting in the turbidity of solution due to the formation of antimony oxychloride precipitate. In this study, the sample was dissolved with HNO3-HCl-HClO4 system. Then As and Sb were removed with hydrobromic acid (HBr). The method for the determination of Pb and Bi contents in arsenic-antimony soot by inductively coupled plasma atomic emission spectrometry (ICP-AES) was established. The mass concentration of Pb and Bi in range of 1.00-30.00 μg/mL showed linear relationship with the corresponding emission intensity, and the correlation coefficients were 0.999 9. The limits of detection for Pb and Bi in the method were 0.000 6% and 0.006%.The contents of Pb and Bi in five typical arsenic-antimony soot samples were determined according to the experimental method. The relative standard deviations (RSD, n=11) of determination results were less than 2%. The Grubbs test results indicated that there was no abnormal value in 11 measurements. The spiked recoveries were between 94.0% and 102.3%. The determination results were consistent with those obtained by flame atomic absorption spectrometry (FAAS) and EDTA titration method. The proposed method effectively solved the turbidity problem of solution due to the hydrolysis of Sb after dissolution of arsenic-antimony soot, thus solving the problem of inaccurate determination results of Pb and Bi. It could be applied for the determination of Pb and Bi contents in arsenic-antimony soot samples.
罗海霞, 陈殿耿. 氢溴酸分离基体-电感耦合等离子体原子发射光谱法测定砷锑烟灰中铅和铋[J]. 冶金分析, 2024, 44(2): 40-46.
LUO Haixia, CHEN Diangeng. Determination of lead and bismuth in arsenic-antimony soot by inductively coupled plasma atomic emission spectrometry after matrix separation with hydrobromic acid. , 2024, 44(2): 40-46.
[1] 汤海波,秦庆伟,郭勇,等.高砷锑烟尘焙烧脱砷试验研究[J].矿产保护与利用,2014(3):36-39. TANG Haibo,QIN Qingwei,GUO Yong,et al.Pretreatment of high arsenic and antimony smelting dust for arsenic removal using roasting proess[J].Conservation and Utilization of Mineral Resources,2014(3):36-39. [2] 王雷.双氧水选择性氧化高砷锑烟灰的工艺研究[J].四川冶金,2020,49(2):30-32. WANG Lei.Research on the process of selective oxidation of high arsenic soot in hydrogen peroxide[J].Sichuan Metallurgy,2020,49(2):30-32. [3] 喻小强,徐家聪,易勤,等.砷锑烟灰NaOH常压碱浸分离砷锑的工艺[J].有色金属科学与工程.2021,12(3):42-49. YU Xiaoqiang,XU Jiacong,YI Qin,et al.Study on separating arsenic and antimony by NaOH alkali leaching of arsenic and antimony soot[J].Nonferrous Metals Science and Engineering,2021,12(3):42-49. [4] 方洪生,王晓阳,李宝华,等.高砷锑烟尘脱砷工艺研究现状[J].云南冶金,2022,42(1):38-41. FANG Hongsheng,WANG Xiaoyang,LI Baohua,et al.The research status of arsenic removal from high arsenic-antimony fume[J].Yunnan Metallurgy,2022,42(1):38-41. [5] 王文祥,王晓阳,方红生,等.砷碱渣/高砷锑烟尘协同脱砷及有价金属回收[J].矿冶工程,2022,42(2):103-120. WANG Wenxiang,WANG Xiaoyang,FANG Hongsheng,et al.Arsenic removal and valuable metal recovery from high arenic-and-antimony flue dust by using arsenic-alkali residue[J].Mining and Metallurgical Engineering,2022,42(2):103-120. [6] 方彦霞,郑省政,王红燕.ICP-AES测定锑烟灰中铜、银、硒、碲、砷、铋方法研究[J].甘肃冶金,2012,34(4):101-103. FANG Yanxia,ZHENG Shengzheng,WANG Hongyan.ICP-AES determination of Cu,Ag,Se,Te,As and Bi in antimony soot[J].Gansu Metallurgy,2012,34(4):101-103. [7] 郑向明,叶玲玲,江荆,等.微波消解-电感耦合等离子体原子发射光谱法测定含碳化铬锌物料中铅铜铁镉铬砷[J].冶金分析,2019,39(5):49-56. ZHENG Xiangming,YE Lingling,JIANG Jing,et al.Determination of lead,copper,iron,cadmium,chromium and arsenic in zinc material containing chromium carbide by microwave digestion inductively coupled plasma atomic emission spectrometry[J].Metallurgical Analysis,2019,39(5):49-56. [8] 宋祖峰,陆向东,荚江霞,等.电感耦合等离子体原子发射光谱法测定低碳低钛硅铁中痕量铌钒锆[J].冶金分析,2018,38(5):35-40. SONG Zufeng,LU Xiangdong,JIA Jiangxia,et al.Determination of trace niobium,vanadium and zirconium in low carbon and low titanium ferrosilicon by inductively coupled plasma atomic emission spectrometry[J].Metallurgical Analysis,2018,38(5):35-40. [9] 国家质量监督检验检疫总局.JJF 1059.1—2012 测量不确定度评定与表示[S].北京:中国质检出版社,2013. [10] 北京矿冶研究总院测试研究所.有色冶金分析手册[M].北京:冶金工业出版社,2004:160-161,165-166,184-185,187.
