Abstract：In order to solve the corrosion problem of platinum crucible by the reducing substances in ferrochrome sample during high temperature fusion, the following experiment conditions were adopted: under the temperature of 600-850 ℃, the sample with carbon loss correction, the special oxidizing agent for chromium alloy and anhydrous lithium metaborate were mixed, and the high-carbon ferrochrome sample was oxidized in the ceramic crucible with graphite powder as the base by temperature programming; after oxidation, sodium hexametaphosphate and anhydrous lithium metaborate were used as the flux, and 1-3 mL of 300 g/L ammonium bromide solution were added as the release agent; the mixture was melted in electric melting furnace at 1 050 ℃ for 20 min to prepare the glass pellet, which was then determined by X-ray fluorescence spectrometry. Consequently, a determination method of chromium, iron, silicon and manganese in high-carbon ferrochrome was established. The lower limits of determination for silicon and manganese were 44.51 μg/g and 22.62 μg/g, respectively. The precision tests showed that the relative standard deviations (RSD, n=12) of determination results for chromium, iron, silicon and manganese were 0.44%, 0.51%, 2.1% and 4.8%, respectively. The trueness tests showed that the errors between the measured values of chromium, iron, silicon and manganese in certified reference materials of high carbon ferrochrome and the standard values could be controlled within the allowable deviation ranges specified in GB/T 4699.2-2008, GB/T 5687.13-2021, GB/T 5687.2-2007 and GB/T 5687.10-2006, respectively. According to the proposed technical scheme, the determination results of chromium, iron, silicon, and manganese in high carbon ferrochrome could meet the routine detection requirements of high-carbon ferrochrome samples.
[1] BÉRUBÉ Luc,RIVARD Sébastien,BOUCHARD Mathieu.自动化硼酸盐熔融与X-射线荧光光谱分析组合技术在铁合金工业中的应用[J].冶金分析,2012,32(5):29-35. BÉRUBÉ Luc,RIVARD Sébastien,BOUCHARD Mathieu.Integration of the robotized borate fusion technique with XRF analysis within the context of the ferroalloy industry[J].Metallurgical Analysis,2012,32(5):29-35. [2] 张天佑,李国会,仲平.X射线荧光分析[M].北京:科学出版社,1987. [3] 吉昂,陶光仪,卓尚军,等.X射线荧光光谱分析[M].北京:科学出版社,2003. [4] 罗立强,沈亚婷,吴晓军.X射线光谱分析技术发展新趋势与新方向[J].冶金分析,2021,41(12):18-26. LUO Liqiang,SHEN Yating,WU Xiaojun.Progress and trend of X-ray spectrometry[J].Metallurgical Analysis,2021,41(12):18-26. [5] 邢文青,曾霞,马秀艳,等.熔融制样-X射线荧光光谱法测定铬铁中铬硅磷钛[J].冶金分析,2017,37(9):57-62. XING Wenqing,ZENG Xia,MA Xiuyan,et al.Determination of chromium,silicon,phosphorus and titanium in ferrochromium by X-ray fluorescence spectrometry with fusion sample preparation[J].Metallurgical Analysis,2017,37(9):57-62. [6] 冯超,杜彩霞,鲍希波,等.X射线荧光光谱法同时测定铬铁中铬、硅、锰和磷的含量[J].理化检验(化学分册)(Physical Testing and Chemical Analysis (Part B:Chemical Analysis)),2019,55(6):715-718. [7] 李小青.熔融制样-X射线荧光光谱法测定锰铁和金属锰中锰硅磷[J].冶金分析,2018,38(6):39-42. LI Xiaoqing.Determination of manganese,silicon,phosphorus in ferromanganese and manganese metal by X-ray fluorescence spectrometry with fusion sample preparation[J].Metallurgical Analysis,2018,38(6):39-42. [8] 顾强,王彬果,冀丽英,等.熔融制样-X射线荧光光谱法测定钛铁合金中主量元素[J].冶金分析,2021,41(4):53-58. GU Qiang,WANG Binguo,JI Liying,et al.Determination of major elements in ferrotitanium by X-ray fluorescence spectrometry with fusion sample preparation[J].Metallurgical Analysis,2021,41(4):53-58. [9] 闫丽.熔融制样-X射线荧光光谱法测定锰铁合金中硅锰磷[J].冶金分析,2022,42(6):45-50. YAN Li.Determination of silicon, manganese and phosphorus in ferromanganese alloy by X-ray fluorescence spectrometry with fusion sample preparation[J].Metallurgical Analysis,2022,42(6):45-50. [10] 邢文青,马秀艳,曾赞喜,等.熔融法制样-X射线荧光光谱法测定钛铁中5种元素含量[J].理化检验(化学分册)(Physical Testing and Chemical Analysis(Part B:Chemical Analysis)),2018,54(3):312-316. [11] 亓冰,张庆峰,鞠艳美,等.X射线荧光光谱法检测高炉壁夹杂料中主次量成分时残碳的准确测定和去除[J].理化检验(化学分册)(Physical Testing and Chemical Analysis(Part B:Chemical Analysis)),2023,59(8):970-973. [12] 王平英,陈鹏飞.熔融制样-X射线荧光光谱法测定高碳铬铁中铬、硅和磷的含量[J].理化检验(化学分册)(Physical Testing and Chemical Analysis (Part B:Chemical Analysis)),2014,50(8):1024-1026. [13] 徐建平.四硼酸锂坩埚内预氧化熔融制样-X-射线荧光光谱法测定锰铁及锰硅合金中的硅、锰、磷[J].理化检验(化学分册)(Physical Testing and Chemical Analysis (Part B:Chemical Analysis)),2016,52(11):1344-1346. [14] 卓尚军.硼酸盐熔融的物理与化学[M].上海:华东理工大学出版社,2006. [15] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 21114—2019 耐火材料X射线荧光光谱化学分析熔铸玻璃片法[S].北京:中国标准出版社,2019. [16] 梁钰.X射线荧光光谱分析基础[M].北京:科学出版社,2007.
