惰气熔融-红外吸收法测定钽钨合金中氢

doi:10.13228/j.boyuan.issn1000-7571.011594

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (628 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要通过对助熔剂、称样量、分析功率和积分时间的研究,建立了惰气熔融-红外吸收法测定钽钨合金中氢含量的方法。实验结果表明,称取0.15 g钽钨合金样品,放入镍囊,投入脱气后的石墨套坩埚中,设置分析功率为4 000 W,积分时间为60 s,可实现惰气熔融-红外吸收法对钽钨合金中氢含量的测定。方法检出限为0.000 03%,定量限为0.000 1%。将实验方法应用于钽钨合金样品中氢含量的测定,结果的相对标准偏差(RSD,n=11)为16.5%。按照实验方法对另一钽钨合金样品中氢含量进行测定,并加入适量钛标样GBW(E)020187进行加标回收试验,得加标回收率为94%~101%。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：惰气熔融, 钽钨合金, 氢, 红外吸收法

Abstract：A method for the determination of hydrogen content in tantalum-tungsten alloy by inert gas fusion-infrared absorption was established. The flux,sample mass, analytical power and integral time were optimized. The experimental results showed that the content of hydrogen in tantalum-tungsten alloy could be determined by inert gas fusion-infrared absorption method under the following conditions: 0.15 g of tantalum-tungsten alloy sample was transferred into nickel capsules, and then put into graphite crucible after degassing; the analytical power was controlled at 4 000 W; the integral time was 60 s. The limit of detection and limit of quantification was 0.000 03% and 0.000 1%, respectively. The proposed method was applied for the determination of hydrogen content in tantalum-tungsten alloy sample, and the relative standard deviation (RSD, n=11) of determination results was 16.5%. The content of hydrogen in another tantalum-tungsten alloy sample was determined according to the experimental method. Proper amount of titanium standard sample (GBW(E)020187) was added for the recovery test. The recoveries were between 94% and 101%.

Key words： inert gas fusion tantalum-tungsten alloy hydrogen infrared absorption method

收稿日期: 2021-08-10

ZTFLH:	O659.2
	TF125.2+4

基金资助:陕西省创新能力支撑计划(2021PT-024)

作者简介: 王宽 (1983—),男,高级工程师,硕士,主要从事金属材料中气体元素分析的研究工作;E-mail:kwang83@163.com

引用本文:

王宽, 高东旭, 王芳, 石新层, 张哲, 郑伟. 惰气熔融-红外吸收法测定钽钨合金中氢[J]. 冶金分析, 2022, 42(4): 34-37. WANG Kuan, GAO Dongxu, WANG Fang, SHI Xinceng ZHANG Zhe, ZHENG Wei. Determination of hydrogen in tantalum-tungsten alloy by inert gas fusion-infrared absorption method. , 2022, 42(4): 34-37.

链接本文:

http://yjfx.chinamet.cn/CN/10.13228/j.boyuan.issn1000-7571.011594 或 http://yjfx.chinamet.cn/CN/Y2022/V42/I4/34

[1] 王晖,张小明,李来平,等.钽及钽合金在工业装备中的应用[J].装备制造技术,2013,29(8):115-117.
WANG Hui,ZHANG Xiaoming,LI Laiping,et al.Industry application of tantalum and tantalum alloy[J].Equipment Manufacturing Technology,2013,29(8):115-117.
[2] 朱跃进,李素娟,高鹏.脉冲热导法测定铝中氢的探讨[J].冶金分析,2016,36(12):18-25.
ZHU Yuejin,LI Sujuan,GAO Peng.Discussion on determination of hydrogen in aluminium by impulse heating thermal conductivity[J].Metallurgical Analysis,2016,36(12):18-25.
[3] 于燕鹏,胡少成,马红权,等.脉冲熔融-红外吸收热导法测定钢铁材料中氧氮和氢[J].冶金分析,2014,34(10):32-36.
YU Yanpeng,HU Shaocheng,MA Hongquan,et al.Pulse heating-infrared absorption and thermal conductivity method for the determination of oxygen,nitrogen and hydrogen in metallic materials[J].Metallurgical Analysis,2014,34(10):32-36.
[4] 钟华.脉冲加热-红外吸收光谱法测定钒铝合金中氢[J].中国无机分析化学,2013,3(2):56-59.
ZHONG Hua.Determination of hydrogen in vanadium-aluminum alloy by pulse heating-infrared absorption method[J].Chinese Journal of Inorganic Analytical Chemistry,2013,3(2):56-59.
[5] 王晓旋,卜兆杰,黄健强,等.惰气熔融-红外热导法测定12Cr₂Mo₁R焊缝金属中氧氮氢[J].冶金分析,2017,37(7):63-67.
WANG Xiaoxuan,BU Zhaojie,HUANG Jianqiang,et al.Determination of oxygen,nitrogen and hydrogen in 12Cr₂Mo₁R weld metal by inert gas fusion-infrared absorption and thermal conductivity method[J].Metallurgical Analysis,2017,37(7):63-67.
[6] 程晓舫,缪琳.惰气熔融-热导法测定电解锰中氢[J].安徽冶金科技职业学院学报,2005,15(1):31-32.
CHENG Xiaofang,MIAO Lin.Determination of hydrogen in electrolytic manganese[J].Journal of AnHui Vocational College of Metallurgy and Technology,2005,15(1):31-32.
[7] WANG Kuan,LI Bo,SUN Baolian,et al.Determination of oxygen in acid-treated high-purity niobium by X-ray photoelectron spectroscopy[J].Instrumentation Science & Technology:Designs and Applications for Chemistry,Biotechnology,and Environmental Science,2016,44(2):181-188.
[8] 王宽,李波,孙宝莲,等.惰性气体中熔融试样-红外光谱法测定锡钛合金中氧含量[J].理化检验(化学分册),2014,50(6):737-739.
WANG Kuan,LI Bo,SUN Baolian,et al.IR spectrometric determination of oxygen in tin titanium alloy with fusion of sample in inert gas atmosphere[J].Physical Testing and Chemical Analysis (Part B:Chemical Analysis),2014,50(6):737-739.
[9] 王宽,梁清华,周恺,等.惰气熔融-红外吸收法测定钛钼合金中氧[J].冶金分析,2015,35(3):61-63.
WANG Kuan,LIANG Qinghua,ZHOU Kai,et al.Determination of oxygen in titanium-molybdenum alloy by inert gas fusion-infrared absorption method[J].Metallurgical Analysis,2015,35(3):61-63.